● Weighs just 2.3 lbs.
● Battery-powered
● One pint of herbicide to make a
path over one mile long!
● One gallon of total solution covers
over one acre. • Herbi & Herbaflex Can Save You
Compare that to the 20 to 50 gallons you’d waste with conventional sprayers.
When your spray needs don't require motorized application, look to BUBCO for the Micron Herbi sprayer and the Herbaflex sprayer.
The light-weight battery-powered Herbi and Herbaflex systems use the same CDA technology for low volume, low pressure, manual spray applications. The large, controlled droplet size minimizes spray drift for more effective, less costly band spraying of weeds. BUBCO has 1 to 4 gallon backpacks, a spray shield and other accessories which let you assemble a spray system for your specific needs.
Herbi® & HerbaFlex® Systems
The Herbi and Herbaflex systems feature a light-weight design to allow easy operation over an extended period of time without excessive fatigue, and both systems are battery powered with no pumping required. The optional Pro Series lance socket is ergonomically designed to decrease wrist articulation and reduce physical strain and it allows the operator to control liquid flow and electrical power with one hand for more efficient spray application.
The Herbaflex features a housed, spinning disc spray head that recaptures any unsprayed solution for reuse while preventing dripping or excess spraying over a narrow, targeted coverage area.
The Herbi-Twin features and adjustable frame with two uncovered spinning disc heads for controlled droplet application over an even wider coverage area.
The ‘Handydome' has been developed for use in a wide range of weed control situations. A rotary atomizer, designed for Controlled Droplet Application (CDA) application of herbicides, is mounted under a flexible circular shroud which rotates freely resulting in efficient weed control and significant labor savings.
Uses include weed control in:
Soft Fruit
Top Fruit
Orchards
Vineyards
Amenity
Highways
Forestry
Waterways
Row Crops
Arable
Grassland
Marshland
Features:
Lightweight.
Simple to use.
Fully shielded.
Minimal drift.
Wider spraying windows.
Low volume.
High work rate - up to three times as fast as a knapsack
4 gallon (15 liter) backpack and set of four 'D' cell batteries included.
Specifications
Width of dome/sprayed strip:
13.8” (350mm) (nominal)
Weight (empty):
13.7 lbs. (6.2 kg)
Weight (Ready to spray):
46.7 lbs. (21.2kg)
Spraying time given by
4 gallon (15 liter) backpack:
The hand held Microwipe has been specially developed for the selective application of systemic herbicides and is particularly suitable for those herbicides containing glyphosate e.g. Roundup.
The Microwipe has significant advantages over conventional methods of application such as knapsack sprayers for spot applications or treating sensitive areas. The concentrated herbicide within the Microwipe is applied only to those plants that the rope wick comes into contact with. By moving the Microwipe over the leaves of a weed, a small dose of herbicide is transferred to the target weed only, with surrounding plants uncontaminated. The Microwipe is therefore ideal for treatment of weeds in row crops, vegetable gardens, between grape vines, around trees, or any other place where conventional treatment would be too dangerous or difficult.
The Microwipe gives excellent results when used on individual weeds or clumps of weeds. The first effects will generally be seen 1 - 2 weeks after treatment when using glyphosate based herbicides.
Light to carry and easy to use.
No risk of drift.
No contamination of soil.
Economical.
Minimal water requirement.
Specifications
Weight - empty 1.43 lbs. (0.65 Kg)
Weight- ready to spray 2.65 lbs. (1.2 Kg)
Capacity .22 Quarts (0.21L)
Handle Material Clear plastic
Wick Material Nylon
Seals
BUBCO offers the Enviromist line of covered spray system products for the controlled application of herbicides and fungicides.
This patented system combines low-pressure, low-volume, controlled droplet application(CDA) with a dome or cover to prevent drift.
This allows spraying in wet or windy conditions, when conventional spray equipment cannot be used, and provides a cost savings of over 50%.
Mounting an Eviromist dome or cover sprayer to an ATV or small tractor enables faster application speeds. thereby reducing labor and vehicle operating costs.
The Undavina is designed for use around mature trees, vines and other plantings. The skirt construction allows for covered spraying over more rugged terrain, including rocks and sprinkler heads. The optional, slip-on cover can be fitted to an Undavina sprayer for use around young trees and vines. This configuration gives you the spray protection of a Spraydome cover while retaining the Undavina's ability to handle more rugged terrain.
The Spraydome cover is designed to gently deflect and roll around the fragile stems of young plants. The plastic construction is light weight and durable.
Adjustable Spraydome
For wider-area covered spraying, choose the Spraydome 1524, 2034, or 3049 Tow or three-point models.
Configured with the Spraydome or Undavina in-the-row units, you can assemble the spray system that meets your specific needs.
AA405G5 Spraydome 1524 3 Point Vineyard Sprayer
Orchard Special
The Orchard Specials cover a wide range of areas and include a Right and Left Spraydome 1200, Adjustable Outrigger Boom, Backplate, Parts kit and Spraywand. Tow or Three Point offered. Also, available for Vineyards.
The Vegedome is designed for use on row crops, levees, or other applications that require custom-sized, covered spray swaths. The shielded design gently deflects and rolls for crop protection, and the spray swath can be adjusted to cover an area from 6 to 39 inches wide.
The Vegedome and Spraymiser are designed for use on row crops, levees, or other applications that require custom-size, covered spray swaths. The shielded design gently deflects and rolls for crop protection, and the spray swath can be adjusted to cover an area from 6 to 39" wide.
BUBCO offers a supply tank that can be mounted directly on an ATV or you can choose a three point tank or towed tank for applications that require a greater volume capacity.
The modular panel design features individual control units for more accurate flow rate monitoring. Each unit includes a lamp that indicates operation and a display that shows the flow rate for each spray device.
Mounting Booms for the Enviromist Sprayers
Extension Bar - 22" for tree crops
ATV Front Rack Extension (for narrow row vineyards 6-10 foot)
ATV Mounting Kit (Standard mounting for In-Row units)
Spraymiser/Vegedome Tow Hitch
Spraymiser/Vegedome For AA430 Tank
Spraymiser/Vegedome for BD23055 with 1 Dome Bracket
Landpride Treker
John Deere Gator Front Mounting Kit
John Deere Gator HPX Front Mounting Kit
John Deere Gator Rear Mounting Kit
Kubota RTV 900 Front Mounting Kit
Kawasaki 500 Series Front Mounting Kit
Kawasaki 600 Series Front Mounting Kit
Stand for UTV Front Mounting Kit
Mid - Mount Tractor Single Row Mounting Kit
Mid - Mount Tractor Double Row Mounting Kit
Front - Mount Tractor with AA430 - 21 Gallon Tank Bracket
Front Mounted Orchard Boom Double Row 16' - 26' Hydraulic
If you prefer conventional boom spraying, choose the Micromax Controlled Droplet Applicator. The Micromax CDA can provide a 35" to 72" spray width. Up to 8 units can be boom mounted to cover a 20" wide area or you can use a double boom setup to cover a 40' wide area in a single pass.
The Micromax CDA utilizes centrifugal force - instead of hydraulic pressure - to create spray patterns. This produces a small-sized, low-pressure droplet for more efficient and effective coverage.
And BUBCO offers control panels, supply tanks, pumps and other accessories to let you assemble the spray system which meets your specific need.
Pumps
Flojet Pumps
BUBCO offers Flojet pumps that can deliver flow rates up to 5 gpm and pressures to 100 psi. Choose the right one for your application from our extensive line of over 100 different pump models.
BUBCO offers the Electrocoup Trimmer for quicker, easier and less fatiguing hand pruning operations.
The Electrocoup Trimmer features an automatic safety control mechanism that allows the blade to stop instantly at any time or at any position during the cutting cycle, and a glove with steel reinforced thumb and fingers for additional protection.
The Electrocoup Hand- Held Trimmer is lightweight (less than 900 g), and is battery powered for up to 10 hours of continuous operation.
Its battery recharges overnight. The recharge cycle negates any battery memory, eliminating the need to run the power completely down before recharging.
The trimmer features a waterproof motor and electronics system for reliability, and an automatic safety control mechanism for protection.
Additional accessories make Electrocoup the most efficient, effective and safe hand-held trimmer available.
The Electrocoup flat back with braces fits comfortably around the user's waist to evenly distribute the battery weight, and it includes a holster to hold the trimmer when not in operation. A hard plastic storage/carrying case holds all these elements, plus a spare blade and sharpening stone.
High Speed Stainless Blades, Never Sharpen
Vertical Breakaway System To Protect Equipment
Complete Hydraulic Distributor, Hoses And "J.I.C" Couplers
Required Hydraulic Capacity - 5.2 GPM @ 2200 PSI
Flow Limiter for Motor Controls
Hydraulic Filter For Long Motor Life
Modular Frame Construction
Storage Stand For Parking Machine
Equipped With Reinforcement Braces And Mounting Bracket
Profilmatic P2000S
Adjustable from 11 to 26 Inch Arbor Opening
Equipped with 4 Hydraulic Motors
Equipped with 1-32" Lift Cylinder
Adjustable Skirting Elements with Motors for Under Arbor Canes
BUBCO offers the Collard line of hedge trimmers for landscaping, public works, and commercial maintenance.
The Collard line of hedge trimmers features 3 to 7 blade configurations, with 400, 500 and 600mm blade diameters to match your specific application.
The hedge trimmers can be fitted with circular- saw blades for dry cutting or flail plates for green cutting. Blades can be changed quickly for different hedge conditions, and intermixed for hybrid applications. And the blade rotation reverser makes it easy to clear plant cuttings from the blades.
The trimmers can be fitted to a variety of vehicles and platforms, and they can be operated from a vehicle's hydraulic system or an optional power supply.
The Collard Hedge Trimmer shown here can be attached to a vehicle by means of a standard 3- point system. It is equipped with 3 flail blades for green trimming, and is operated by hydraulic controls.
The T2200E Tree Hedger would mount on front of tractor and hedge woody material up to 6 inches in diameter. This machine would adjust from 2 to 4 foot above ground to a vertical cut of 12.8 foot. The modular cutting bodies are made of aluminum anodized material and are warranted for life. The elements are fitted with Chrome Vanadium saw blades. A flow limiter is equipped on each element to control pressure and insure safe use of work. The motors are rated at 24 GPM @ 3000 PSI. Central Lubrication of bearings mounted on each element for ease of maintenance.
CUTTING ELEMENTS
(1) Collard L.E.M. 8 x 600mm (23.6") + 1 hydraulic motor = 12.8 Foot Cutting Height RH
(1) Collard L.E.M. 8 x 600mm (23.6") + 1 hydraulic motor = 12.8 Foot Cutting Height LH
FRAME
Front Tractor Mounting
Reinforcement Brackets to Mid-Frame of Tractor
Requires 6000# Tractor Operating Weight
(1) Lift Cylinder 40 Inch Stroke
(2) Width Cylinders 30 Inch Stroke Each to accommodate Cutting Widths of 5-10 Foot
(2) Slope Cylinders 8 Inch Stroke Each
(2) Transportation Cylinders
The T2400E Tree Hedger would mount on front of tractor and hedge woody material up to 6 inches in diameter.This machine would adjust from 2 to 4 foot above ground to a vertical cut of 13.4 foot. Each Vertical frame would be split to allow for angle cuts and equipped with two hydraulic motors per side. The modular cutting bodies are made of aluminum anodized material and are warranted for life. The elements are fitted with Chrome Vanadium saw blades. A flow limiter is equipped on each element to control pressure and insure safe use of work. The motors are rated at 24 GPM @ 3000 PSI. Central Lubrication of bearings mounted on each element for ease of maintenance.
CUTTING ELEMENTS
(2) Collard L.E.M. 4 x 600mm (23.6") + 1 hydraulic motor = 13.4 Foot Cutting Height RH
(2) Collard L.E.M. 8 x 600mm (23.6") + 1 hydraulic motor = 13.4 Foot Cutting Height LH
FRAME
Front Tractor Mounting
Reinforcement Brackets to Mid-Frame of Tractor
Requires 6000# Tractor Operating Weight
Split frame for angle hedging and skirting of trees
(1) Lift Cylinder 40 Inch Stroke
(2) Width Cylinders 30 Inch Stroke Each to accommodate Cutting Widths of 5-10 Foot
(2) Slope Cylinders 8 Inch Stroke Each
(2) Transportation Cylinders
- 1 cylinder double effect stroke 11" to pass from the horizontal
to the vertical position of the cutting element
- 1 cylinder double effect stroke 27.5" for width adjustment of
the cutting element
- 1 kit of 2 hoses 16' each (alimentation - return)
- 1 kit of hoses for cylinder 8' each
- 1 flow divider
(maximum oil flow : 15.8 gpm - maximum pressure 3000 psi) BRACKETS MUST BE BUILT YOURSELF
- MINILEM® PROFILE 4 DISHES WITH MOBILES KNIFES 450mm:
Description
Cutting equipment is constructed principally for regular maintenance work
with dishes, limited at the pruning of annual maintenance of hedge
of 1/2" maxi. (with the rotary dishes).
This cutting equipment can receive 450mm 4 saws kit
for pruning very reduced branches
MINILEM® PROFILE WITH 3 DISHES 450mm cut 4.10' (1m25)
Weight : 79.4lbs (36 Kgs)
1 cylinder double effect stroke 11" to pass from the horizontal to the vertical position of the cutting element
1 cylinder double effect stroke 27.5" for width adjustment of the cutting element
2 hoses 16' each
2 hoses 8' each
Hydraulic Requirements:
21 GPM @ 2500 PSI
Advise Tractor and Loader To be mounted when ordering
Order#
5600 4003
Must order one element below to complete kit
6000 SERIES MODULAR PRUNING BLADE ELEMENTS
Modular body made of LIGHT anodized alloy section.
All Elements come fitted with 24" CHROME VANADIUM saw blades,
Flail Disc and Knife Cutting System is an Option
Central lubrication on the basic blade unit.
.jpg)
.jpg)
